Flashlights

Camping Lampshade

Description

The camping lampshade is a unique accessory specially designed for Fenix flashlights which converts your flashlight into an exquisite camping light immediately. Providing flood light with a wider range, it extremely caters for outdoor camping, hiking, daily use as well as reading in the darkness.

Features

• Illuminates a hemisphere range with the opposite direction of the light beam resistance with favorable stability High temperature resistance with favorable stability
  ·Suitable for flashlight with a 21-22.5mm diameter, such as Fenix LD10, LD12, LD20,LD22, etc
  ·AD502-N suitable for flashlight with a 31.5-34mm diameter, such as Fenix TK11, TK15,RC10, etc

AOT Traffic Wand

Description

Fenix traffic wands can convert your flashlight into a glowing red high-visibility wand. It's the best option for emergency situations and traffic control.

Features

·Made of PC 2805 plastic created by Bayer Material Science AG, high quality guarantee
·Anti-impact and anti-heat compressive resistant, super durable, which is known as bullet-proof plastic
·High temperature durability
·Easy to attach, easy to remove
·AOT-L is compatible with: E40\E50\LD41\TK22\RC15 etc.
·AOT-M is compatible with: TK11\TK15\RC10 etc.
·AOT-S is compatible with: LD10\LD12\LD20\LD22\PD22\PD32\PD35 etc.

Fenix Remote Pressure Switch

Description

The Fenix remote pressure switch is specially designed for tactical flashlights-three sensors connected in parallel to the spring steel switch module for easy reliable activation. The flashlight is activated by applying slight finger pressure to the switch, and once pressure is released, the flashlight turns off. The 80cm cable (max length) allows for remote controlling of the flashlight, making it more agile and convenient for your tactical mission or hunting.

Features

• Durable for over 100,000 activations. Flashlight is activated by pressing any one of the four sensors.
  · Cable made from resilient PU material, 23cm in length when coiled, 80cm in length when expanded.
  · The tail cap is made from T6-grade aluminum with Type III hard-anodized finish for durability and scratch resistance.
  · Side switch in tail cap capable of longtime 1A electric current passing, which works separately with the pressure pad switch.
  · Water-proof to IPX-8 standard
  · The tail cap is 25.4mm in diameter, 40mm in length. Works with Fenix TK11,TK15,TK22, flashlights.
  · Pressure pad switch, cable and the tail cap weigh 53.2 grams total

Fenix PD35

Description

Are compact size and mighty output really mutually exclusive? Not in the case of PD35. Weighting only 87 grams and less than 14 centimeters long, PD35 delivers a stunning 850-lumen maximum output from one 18650 battery. Six outputs including strobe mode cover from daily use to outdoor and professional use while a simple press on the side switch is all you need to select output. Portable becomes powerful with this go-everywhere, category-changing model from Fenix.

Features

• Cree XM-L 2 (U2) LED with a lifespan of 50,000 hours
  ·Uses one 18650 rechargeable Li-ion battery or two 3V CR123A Lithium batteries
  ·139mm (Length) x 25.4mm (Diameter)
  ·87-gram weight (excluding the battery)
  ·Digitally regulated output - maintains constant brightness
  ·Low-voltage warning function to remind you to replace the battery
  ·Reverse polarity protection guards against improper battery installation
  ·ver-heat protection to avoid high-temperature of the surface
  ·Anti-roll, slip-resistant body design
  ·Tactical tail switch with momentary-on function
  ·Side switch on the head
  ·Made of durable aircraft-grade aluminum
  ·Premium Type III hard-anodized anti-abrasive finish
  ·Toughened ultra-clear glass lens with anti-reflective coating

Fenix LD22

Description

Fenix LD22 provides reliable illumination in a wide variety of applications. It offers four brightness levels, strobe and hidden SOS. Powered by two AA batteries, LD22 delivers a max 215-lumen output and a 150-hour long runtime. The compact flashlight must be your good partner to meet various needs in the outdoor and urgent conditions, such as camping, hiking, climbing and caving, etc.

Features

• Cree XP-G2 (R5) LEDwith a lifespan of 50,000 hours
• Uses two AA (Ni-MH, Alkaline ) batteries
• 156mm (Length) x 21.5mm (Diameter)
• 60-gram weight (excluding batteries and body clip)
• Digitally regulated output maintains constant brightness
• Reverse polarity protection guards against improper battery installation
• Anti-roll, slip-resistant body design
• Push-button tail cap switch with momentary-on function
• Side mode switch in the front, fast and convenient
• Made of durable aircraft-grade aluminum
• Premium Type III hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating

Fenix LD12

Description

Fenix LD12 is a flashlight with side mode switch. It offers 4 brightness levels, Strobe and SOS. Using only one AA battery, it delivers a max 125-lumen output and a max 100-hour long runtime! Featuring the exquisite and compact design, user-friendly interface and waterproofing to IPX-8 Standard, Fenix LD12 is extremely suitable for hiking, camping and EDC.

Features

• Cree XP-G2 (R5) LEDwith a lifespan of 50,000 hours
• Uses one AA (Ni-MH, Alkaline ) battery
• 105mm (Length) x 21.5mm (Diameter)
• 54-gram weight (excluding battery and body clip)
• Digitally regulated output - maintains constant brightness
• Reverse polarity protection, to protect from improper battery installation
• Anti-roll, slip-resistant body design
• Tactical tail cap switch with momentary-on function
• Side mode switch in the front, fast and convenient
• Made of durable aircraft-grade aluminum
• Premium Type III hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating

Fenix TK22 -Cree XM-L2 (U2)

Description

Fenix TK22 features a powerful, tough, durable, and fully waterproof design intended for harsh outdoor conditions. Powered by large capacity 18650 Li-ion battery, safe 16340 LiFePO4 battery or frost-resistant CR123ALithium battery, the light makes a perfect combination of extreme brightness and ultra long runtime. The innovative side switch on the head flows between four brightness levels and strobe mode，plus the advanced constant brightness technology and waterproof to IPX-8 standard, TK22 will be your reliable partner when searching ，rescuing, etc.

Features

• Uses CreeXM-L2(U2)LED with a lifespan of 50,000 hours
  ·Uses one 18650 rechargeable Li-ion battery or two 3V CR123A Lithium batteries
  ·147mm (Length) x 25.4mm (Diameter) x 40mm (Head)
  ·157-gram weight (excluding the battery)
  ·Digitally regulated output - maintains constant brightness
  ·Low-voltage warning function, to remind the users of battery replacement when in low voltage
  ·Reverse polarity protection, to protect from improper battery installation
  ·Anti-roll, slip-resistant body design
  ·Tactical tail cap switch with momentary-on function
  ·Mode switch button in the front, one press for brightness selection
  ·Made of durable aircraft-grade aluminum
  ·Premium Type III hard-anodized anti-abrasive finish
  ·Toughened ultra-clear glass lens with anti-reflective coating

TK15UE

Description

The Fenix TK15UE employs the new CREE XP-L HI V3 LED technology, which allows the light to throw an impressive beam distance of 325 meters and deliver a maximum output of 1000 lumens. With an impact-resistant strike face bezel, a tactical tail switch with momentary on capability and a side switch to access four brightness levels and Strobe, this tactical light is built to assist law enforcement, search and rescue, military and more.

Features

• Uses Cree XP-L HI V3 LED with a lifespan of 50,000 hours
  ·Powered by one 18650 rechargeable Li-ion battery or two CR123A Lithium batteries
  ·142.5mm Length x 25.4mm Body Diameter x 34mm Head Diameter(5.6” x 1.0” x 1.3”)
  ·141 grams (5.0 oz) excluding battery
  ·Compatible with AER-01/AER-02 remote pressure switch
  ·Digitally regulated output maintains constant brightness
  ·Reverse polarity protection, to protect from improper battery installation
  ·Anti-roll and anti-slip body design
  ·Tactical tail switch for momentary-on function
  ·Functional side switch for output selection
  ·Made of durable aircraft-grade aluminum
  ·Premium type Ⅲ hard-anodized anti-abrasive finish
  ·Toughened ultra-clear glass lens with anti-reflective coating